Description

This is a serious flow optimization for your Mini Mondo surface cleaner, aimed at maximizing water volume and efficiency. Here’s how to execute it step by step:

Why This Upgrade Matters:

• Larger hoses (½” vs. ⅜”) → Less restriction = higher flow

• Tsunami block at 40° angle → Optimized water mixing and smoother output

• ½” hydro excavation gun (32 GPM) → Handles high flow rates without bottlenecking

• Eliminating ¼” and ⅜” fittings → No choke points in the system

Conversion Process:

1. Upgrade the Hoses

• Remove ⅜” hoses and replace them with ½” high-flow hoses rated for pressure washing.

• Ensure proper hose length to avoid unnecessary bends/restrictions.

2. Install a Tsunami Block (40° Angle)

• Use a Tsunami water separator block positioned at a 40° angle to improve water flow dynamics.

• This reduces turbulence, ensuring smoother and more efficient water delivery.

3. Replace the Gun with a ½” Hydro Excavation Gun

• Swap out the ⅜” gun for a ½” hydro excavation gun rated for 32 GPM.

• Ensure the new gun is pressure-rated to match or exceed your system’s PSI.

4. Remove and Replace Fittings

• Completely eliminate ¼” and ⅜” fittings, replacing them with ½” stainless steel or brass fittings.

• Check for any restrictive reducers and upgrade to full-flow connections.

5. Optimize Nozzles

• If nozzle sizes were chosen based on ⅜” flow, upgrade to larger orifice nozzles to match the new ½” flow rate.

Expected Performance Gains:

• Higher flow rate = Faster cleaning

• Better pressure consistency = Less wear on the pump

• Eliminating choke points = More efficient water delivery

• Hydro excavation gun = More control & durability

Bottom Line: This upgrade will significantly boost flow, pressure stability, and performance, making your Mini Mondo surface cleaner operate at its max potential.

Kit includes:

Rampage whip lines (length varies by selection)

1x Tsunami Dual Flow Block (Mini Mondo & Mondo Force kits only)

Zip ties

1/2” Quick Connect SS (number varies by selection)

Optional ST-3240 Hydro Inline 4500psi 32GPM Gun 1/2” connections (depends on selection)

Optional SA-3240 Inline Hydro Excavation Spray Gun 3200psi 16GPM 1/2” connections (depends on selection)